Na}{

File Content: `mpt-statusd`

#! /bin/sh

# Author: Petter Reinholdtsen <pere@hungry.com>
# License: GNU General Public License v2 or later
#
### BEGIN INIT INFO
# Provides:          mpt-statusd
# Description:       Fusion MPT RAID controller diagnostic tool
# Required-Start:    $remote_fs $syslog
# Required-Stop:     $remote_fs $syslog
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: Check mpt-status values in the background.
### END INIT INFO

PATH=/sbin:/bin:/usr/sbin:/usr/bin
DESC="mpt-status monitor"
NAME=mpt-statusd
PIDFILE=/var/run/$NAME.pid
STATUSFILE=/var/run/$NAME.status
SCRIPTNAME=/etc/init.d/$NAME


# Do not touch you can configure this in /etc/default/mpt-statusd
MAILTO=root   # Where to report problems
PERIOD=600    # Seconds between each check    (default 10 minutes)
REMIND=7200   # Seconds between each reminder (default 2 hours)
RUN_DAEMON=yes
ID=0

[ -e /etc/default/mpt-statusd ] && . /etc/default/mpt-statusd

# Gracefully exit if the package has been removed.
test -x /usr/sbin/mpt-status || exit 0

. /lib/lsb/init-functions
[ -e /etc/default/rcS ] && . /etc/default/rcS

if [ $RUN_DAEMON = "no" ] ; then
	log_begin_msg "mpt-statusd is disabled in /etc/default/mpt-statusd, not starting."
    	log_end_msg 0
	exit 0
fi

check_mpt() {
    echo $$ > $PIDFILE.new && mv $PIDFILE.new $PIDFILE
    while true ; do
        # Check ever $PERIOD seconds, send email on every status
        # change and repeat ever $REMIND seconds if the raid is still
        # bad.
        if (mpt-status -i $ID) |grep -q 'state OPTIMAL' ; then
            BADRAID=false
        else
            BADRAID=true
            logger -t mpt-statusd "detected non-optimal RAID status"
        fi
        STATUSCHANGE=false
        if [ true = "$BADRAID" ] ; then
            # RAID not OK
            (mpt-status -i $ID) > $STATUSFILE.new
            if [ ! -f $STATUSFILE ] ; then # RAID just became broken
                STATUSCHANGE=true
                mv $STATUSFILE.new $STATUSFILE
            elif cmp -s $STATUSFILE $STATUSFILE.new ; then
                # No change.  Should we send reminder?
                LASTTIME="`stat -c '%Z' $STATUSFILE`"
                NOW="`date +%s`"
                SINCELAST="`expr $NOW - $LASTTIME`"
                if [ $REMIND -le "$SINCELAST" ]; then
                    # Time to send reminder
                    STATUSCHANGE=true
                    mv $STATUSFILE.new $STATUSFILE
                else
                    rm $STATUSFILE.new
                fi
            else
                STATUSCHANGE=true
                mv $STATUSFILE.new $STATUSFILE
            fi
        else
            # RAID OK
            if [ -f $STATUSFILE ] ; then
                rm $STATUSFILE
                STATUSCHANGE=true
            fi
        fi
                
        if [ true = "$STATUSCHANGE" ]; then
            hostname="`uname -n`"
            (
                cat <<EOF 
This is a RAID status update from mpt-statusd.  The mpt-status
program reports that one of the RAIDs changed state:

EOF
                if [ -f $STATUSFILE ] ; then
                    cat $STATUSFILE
                else
                    (mpt-status -i $ID)
                fi
                echo
                echo "Report from $0 on $hostname"
            ) | mail -s "info: mpt raid status change on $hostname" $MAILTO
        fi
	sleep $PERIOD &
	# Kill sleep if we're signaled to exit, otherwise we will stay defunct
	# until sleep terminates.
	trap "kill $!; exit" TERM
	wait $!
	trap - TERM
    done
}

check_daemon() {
        # Let's check if there is a daemon which is really running and not timing out
        DAEMON_RUN=`ps aux | grep "/etc/init.d/mpt-statusd check_mpt" | grep -v grep | grep -v daemon`
        if [ -n "$DAEMON_RUN" ] ; then
                return 1;
        else
                return 0;
        fi
}

#
#       Function that starts the daemon/service.
#
d_start() {
    [ -f $PIDFILE ] && PID="`cat $PIDFILE`"
    if [ "$PID" ] ; then
        log_progress_msg "Daemon already running. Refusing to start another"
        return 0
    elif check_daemon ; then
        # Use the daemon package to turn this script into a daemon
        start-stop-daemon --start --quiet --pidfile $PIDFILE \
                --oknodo --exec /usr/bin/daemon /usr/bin/daemon $SCRIPTNAME check_mpt
	return 0
    else
        log_progress_msg "Daemon is already running. Refusing to start another"
        return 0
    fi
}

#
#       Function that stops the daemon/service.
#
d_stop() {
        if [ -f $PIDFILE ] ; then
             	start-stop-daemon --stop --oknodo --quiet --pidfile $PIDFILE > /dev/null 2>&1 
		rm -f $PIDFILE
        else
                log_progress_msg "Daemon is already stopped."
                return 0
        fi
}

# This is a workaround function which does not directly exit and
# therefore can be used by a restart
d_stop_by_restart() {
        if [ -f $PIDFILE ] ; then
                start-stop-daemon --oknodo --stop --quiet --pidfile $PIDFILE
                rm -f $PIDFILE
                log_end_msg 0
        else
                log_progress_msg "Daemon is already stopped."
                log_end_msg 0
        fi
}

case "$1" in
  start)
	if ! [ -e "/dev/mptctl" ] ; then
		modprobe -q mptctl 2>/dev/null
		if [ $? -ne 0 ]; then
			log_failure_msg "Starting $DESC: failed to load mptctl."
			exit 1
		fi
	fi
        log_begin_msg "Starting $DESC: $NAME"
        d_start ; CODE=$?
        log_end_msg $CODE
        ;;
  stop)
        log_begin_msg "Stopping $DESC: $NAME"
        d_stop ; CODE=$?
        log_end_msg $CODE
        ;;
  check_mpt)
        check_mpt
        ;;
  status)
	status_of_proc /usr/bin/daemon $NAME
	exit $?
	;;
  restart|force-reload)
        log_begin_msg "Restarting $DESC: $NAME"
        d_stop_by_restart
        sleep 1
        d_start || CODE=$?
        log_end_msg $CODE
        ;;
  *)
        # echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2
        echo "Usage: $SCRIPTNAME {start|stop|restart|force-reload}" >&2
        exit 1
        ;;
esac

exit 0

Name	Size	Permission
acct	2113 bytes	0755
apache-htcacheclean	2489 bytes	0755
apache2	8181 bytes	0755
apparmor	3740 bytes	0755
apport	2920 bytes	0755
atd	1071 bytes	0755
binfmt-support	1175 bytes	0755
cachefilesd	7254 bytes	0755
console-setup.sh	1232 bytes	0755
cron	3062 bytes	0755
cryptdisks	937 bytes	0755
cryptdisks-early	896 bytes	0755
dbus	3152 bytes	0755
fail2ban	7013 bytes	0755
gological	565 bytes	0755
gophysical	513 bytes	0755
grub-common	985 bytes	0755
hwclock.sh	1748 bytes	0755
ipmievd	3168 bytes	0755
irqbalance	2638 bytes	0755
iscsid	1503 bytes	0755
keyboard-setup.sh	1479 bytes	0755
kmod	2044 bytes	0755
lvm2	695 bytes	0755
lvm2-lvmpolld	586 bytes	0755
mpt-statusd	6097 bytes	0755
ndn-debuglogging	1044 bytes	0755
ndn-megacli	749 bytes	0755
networking	4486 bytes	0755
nfs-common	5658 bytes	0755
nginx	4579 bytes	0755
ntp	1494 bytes	0755
open-iscsi	2433 bytes	0755
open-vm-tools	1846 bytes	0755
openipmi	13788 bytes	0755
php8.1-fpm	4294 bytes	0755
plymouth	1386 bytes	0755
plymouth-log	760 bytes	0755
postfix	3089 bytes	0755
prepstandby	358 bytes	0755
procps	959 bytes	0755
proftpd	5322 bytes	0755
rpcbind	2507 bytes	0755
rsync	4417 bytes	0755
screen-cleanup	1222 bytes	0755
scsitools-pre.sh	2295 bytes	0755
scsitools.sh	2787 bytes	0755
smartmontools	3088 bytes	0755
spamassassin	2096 bytes	0755
ssh	4060 bytes	0755
standby	2933 bytes	0755
stunnel4	5730 bytes	0755
sysstat	1581 bytes	0755
udev	6871 bytes	0755
ufw	2083 bytes	0755
unattended-upgrades	1391 bytes	0755
uuidd	1306 bytes	0755
x11-common	2762 bytes	0755
zabbix-agent	1575 bytes	0755

File Content: mpt-statusd

File Content: `mpt-statusd`